Springfield Arms' Mil-Spec 1911 is based on a slightly revised version of the original 1911. In 1926, Colt made some design changes to meet the needs of the military. The hammer spur was shortened slightly, and the grip safety tang lengthened to minimize hammer "bite." The trigger was shortened to decrease reach, the mainspring housing was rounded slightly to force the muzzle up a bit when the gun was gripped, and the sights were updated with a bolder, easier to see design. This is the model the Springfield emulates, and emulates well.[PAGEBREAK]
The old military 1911s had a reputation for poor accuracy and loose construction. Some of it is true and some of it isn't. While those with many thousands of rounds may have gotten sloppy, a good condition military 1911 will easily shoot five inches at 25 yards. But the old version's trigger pulls can be terrible and may have contributed to "poor accuracy" complaints.
Trust me. The Springfield has no such problems. Our test gun had a sterling trigger pull, measured at an honest, silky smooth four pounds with an RCBS trigger-pull gauge. While a "military" pistol, the Springfield showed excellent fit, and there was nothing we could even remotely consider "slop" when it came to function. The parts fit well, the safety "snicked" on and off neatly, and all the widgets worked as advertised.
I also noticed that the grip frame seemed to be slightly beefier in the front-strap portion. A quick check against an original Colt confirmed my observation. The edges are a bit "squarer," and it appears the front strap is actually a few thousandths thicker. This doesn't hurt a thing, and as a matter of fact, it makes checkering the grip frame easier.
Other than this one minor point, this gun is all 1911 and any G.I. from any period would feel right at home with it in his hand. The features are basic 1911. There's no firing pin safety (like a Series 80 Colt, or one of the new systems from Kimber or Springfield) that locks the firing pin until the trigger is pulled fully to the rear. A titanium firing pin is in place, which effectively prevents an accidental discharge if a loaded gun is dropped on the muzzle. But this is a classic 1911 design, and due caution needs to be exercised when handling it. Again, if you can handle a Glock or a Springfield XD, a 1911 is simple to master, so don't be put-off. The manual of arms to operate a 1911 quickly becomes second-nature.