Update the exterior lighting of your agency's emergency vehicles with these accessories from six leading law enforcement suppliers. These lighting solutions offer easier integration into push bumpers for upfitters and greater versatility for patrol officers. Photos courtesy of vendors.
Emergency Vehicle Lighting
The Valor lightbar by Federal Signal features a non-linear shape to provide 360 degrees of light output. It is designed for usage at 45-degree and 90-degree angles for intersection clearing. Built with Federal Signal's Solaris LED reflector technology, Valor uses powerful LEDs for enhanced light performance. SpectraLux technology provides the ability to change LED colors for combinations of amber, blue, red, or white. The lightbar also features an optional built-in SignalMaster capability for directional traffic warning to the rear of the vehicle. It is available in 44-inch and 51-inch lengths.
Brooking Industries' new FL-4OFIF flasher interface is designed specifically for the Ford Interceptor sedan and utility models. The unit holds the headlight shutters open allowing the high beams to flash in one of four patterns or randomly through all four. Plug-and-play connectors allow for easy installation without cutting factory wires. It connects by wiring the unit to power and connecting to the existing factory headlight plug. A constant 12 VDC auxiliary output circuit allows any other lighting to be run through the interface.
Code 3's RX 2700 CC with MultiColor (MC) capability uses the latest PriZm II LED multicolor technology for enhanced brightness from one lighthead module. Acting as two full lightbars in one, the color options are available in red/blue, red/white, blue/white, red/amber, blue/amber, and amber/white lightheads. Additionally, the lightbar can create takedown all-white light when a red/white or blue/white lighthead is selected and turned to steady burn. The PriZm II MC lightheads have a five-year warranty and meet SAE and California Title 13 requirements.
Adamson Industries' HG2 Crossfire is an outward-facing tag bezel with an emergency lighting system designed for maximum visibility. The Crossfire lighting design features optics mounted at grazing angles to enhance visibility by emitting light onto a broader field of view. There are multiple color combinations and flash patterns available. Constructed of aluminum with a black powder coat finish for durability, it utilizes factory mounting locations for ease of installation and its design can fit to all vehicles.
Pro-gard Products increased the integrated LED lighting options on their Universal Sedan and SUV Push Bumpers with the addition of heavy-duty ION LEDs. There is a two LED option available on the Sedan Push Bumpers and a two or four LED option for the SUV Push Bumpers. All are available in three lighting options of all red, all blue, or half red and half blue. The integrated LEDs come pre-wired and mounted in the Push Bumper for quick installs.
The C-9 Surface Mount light from 911 Signal USA offers full lighting visibility from a single surface mount lighthead. Using the C-9 can reduce the amount of lights needed on the emergency vehicle because it gives a full 180-degree spread of light. The C-9 Surface Mount combines nine 3-watt LEDs for 27 watts of LED lighting. Measuring 6.75 inches wide by 1.5 inches tall by 2 inches deep, the unit can be mounted on the side of a push bumper or on the front or rear of the vehicle.